Transformer Tester 5460 Series
5465/5466/5467

Transformer Tester 5460 Series|5465/5466/5467
Features
  •  Test Frequency: 10Hz-200kHz/500kHz/1MHz
  • 48 Channels
  • Built-in Meter Mode
  • Simultaneously display four parameters
  • Basic accuracy up to ±0.1%
  • Open circuit/short circuit function
  • RS-232、Handler、LAN、USB Host 、Handler
  • Pneumatic fixture F5620 built-in 100mA DC Bias
  • USB Host storages can storage setting files, data and capture the screen

MICROTEST 5460 Series Transformer Tester is an all-in-one device designed for measuring important parameters of transformer products. It enables measurements of parameters such as inductance, leakage inductance, DC resistance, AC resistance, quality factor, capacitance, turns ratio, and pin short circuit detection. The measurement frequency range spans from 10Hz to 200k/500k/1MHz. The tester is equipped with built-in support for LCR meter measurement mode and comes with the F5468 pneumatic testing fixture. It provides 48 testing channels and supports 100mA DC bias testing. Customization services are available to tailor the tester to meet specific customer requirements.

Specifications

Selection

Model 5460 Series
Test Channel 48
Test Frequency 10Hz-200kHz
Other 5465 5466 5467
10Hz-200kHz 10Hz-500kHz 10Hz-1MHz

SPEC

Frequency Resolution 5 digits
Basic Accuracy ±0.1%
AC Drive Level 10mV-2Vrms
DC Drive Level 10mV-2V
Output Impedance 100Ω
DC Bias Current 100mA (F5620)
Turn

Inductance or Voltage

Test Freqeuncy:50Hz-200kHz

Test Mode Meter Mode / List Mode
Parameters Measurement Inductance (L)、Impedance (Z)、Capacitance (C)、Resistance (R)、Conductance (G)、Susceptance (B)、Admittance (Y)、Alternating Current Resistance (ACR)、Quality Factor (Q)、θ、Direct Current Resistance (DCR)、Leakage Inductance、Turn Ratio、Balance、Short Circuit

Parameters

Parameters Range

Basic Accuracy

(AC parameter:1kHz)

Speed 
L, LK 0.1nH ~ 9999.99H 0.1% 25ms
C 0.00001pF ~ 999.99mF 0.1% 25ms
Q,D 0.00001 ~ 99999 0.0005 25ms
Z,X,R 0.00001Ω ~ 99.9999MΩ 0.1% 25ms
Y 0.01nS ~ 99.9999S  0.1% 25ms
θ -180°~ +180° 0.03° 25ms
DCR 0.1mΩ ~ 99.999 MΩ 0.1% 25ms
Turn 0.1 ~ 99999.9 turns 0.5% 50ms
Pin-Short 12 pairs, between pin to pin - 15ms

System

  ESR Series / Parallel
  Calibration Open Circuit / Short Circuit
  Built-in stroage testing files 128 sets
  Operation Auto / Manual / Remote Trigger
  Power Supply Voltage:98Vac-132Vac  or 195Vac-264Vac
Frequency:47-63Hz
  Power consumption 300VA
  Environment Temperature:10℃-40℃
Humidity:10-90%RH
  Dimension (W*H*D) 344x145x343 mm (W*H*D)
  Weight 9 Kg
  Interface  RS-232、Handler、LAN、USB Host、EXT. I/O
Display 800*480 Color Screen, 7" TFT