• 0.1% basic accuracy
• Optional computer link software for tracing test data
• Four-wire precision impedance parameters measurement
• Original fixture with zero function, reducing the error of measuring frequency on fixture
• Built-in disconnection detection function to detect whether the measurement loop is normal
• Support LAN interface and USB access data function
• Test 32 sets of inductive impedance (Ls/ACR/DCR/Q) at one time, greatly improving line efficiency

Measurement Data

Frequency	10Hz-200kHz
Parameters	Impedance (Z)、Phase angle(Ø)、Resistance (R)、Inductance (L)、dissipation factor(D)、Quality Factor (Q)、Direct Current Resistance (DCR)、Capacitance (C)
Basic Accuracy	±0.1%(AC 1kHz)
Output Impedance	100Ω
Frequency Trimming Resolution	5digits
Frequency Output Accuracy	±0.01%
Test pin	Up to 64 pins (24/32 coil measurement available)
Equivalent Circuit	Series / Parallel
Mathematical Mode	Absolute / Percentage
Calibration	Open Circuit / Short Circuit

Specifications

Power Supply	98Vac ~ 132Vac or 195Vac ~ 264Vac / 47Hz ~ 63Hz
Display	7.0”, TFT, 800*480
Interface	RS-232, Handler, LAN, USB Host
Flash Memory	128 Sets
Operation	Auto、Manual、Remote Trigger
Environment	Temperature : 10℃ ~ 40℃,    Humidity : 10% ~ 90% RH
Dimension (W*H*D)	344x145x343 mm
Weight	8.4 Kg

Measuring Range

Item	Range	Basic Accuracy (AC 1kHz)	Test Speed
L	0.1nH ~ 9999.99H	0.1%	25ms
C	0.00001pF ~ 999.99mF	0.1%	25ms
Q	0.00001 ~ 99999	0.0005	25ms
Z,R	0.00001Ω ~ 99.9999MΩ	0.1%	25ms
DCR	0.01mΩ ~ 99.999MΩ	0.1%	25ms

Optional Plan

1.PCB factory O/S electric measuring tester
2.Manual clamp independent fixture
3.Pneumatic gripper independent fixture

Applications

Wireless charging induction coil board, inductor coil PCB, NFC antenna, low frequency RFID application soft board

No Related Products