Transformer Tester 5236

5236

Comprehensive Transformer Testing Systems

Transformer Tester

5236 transformer tester, test frequency is 20Hz~500kHz, 20 test points. By adopting innovative patent design, this tester is able to meet all your test requirements for multi-pin network communication transformer under the same volume condition. To prevent the fixture interference from affecting measured values during testing, the software has high-frequency compensation function (zero-setting when the fixture encounters Open/Short), which makes the readings from fixture are almost the same as measured values therefore increase the tester credibility. The best choice for transformer testing. The application of the transformer tester includes power transformers and network communication transformers, etc.

Features
Specifications
Resources
Related Products

Basic Accuracy up to 0.1%
Support computer software connection and advanced software editing function
Innovative fixture zero-setting function to successfully prevent fixture interference from affecting the accuracy of measured values due to high test voltage
Able to test 30 items per second under fastest test speed. Elevate productivity significantly through auto-scan function
Paired with a 20-pin fixture to meet the test requirements for multi-pin network communication transformer
Optional 100mA DC Bias / 5x38 model is equipped with Meter Mode function / Support USB interface for data storag

Measurement Data


Frequency	20Hz-500KHz
Turn Ratio Frequency	50Hz ~ 200kHz (10Vac Max.)
Measurement Parameters	Inductance (L)、Impedance (Z)、Capacitance (C)、Resistance (R)、Conductance (G)、Susceptance (B)、Admittance (Y)、Alternating Current Resistance (ACR)、Quality Factor (Q)、Phase angle(Ø)、Direct Current Resistance (DCR)、Leakage Inductance、Turn Ratio、Balance、Short Circuit
Basic Accuracy	±0.1% (AC parameter : 1KHz)
Output Impedance	100Ω
Frequency trimming resolution	5digits
Frequency output accuracy	±0.01%
Point of Test	20 Points
ESR	Series/Parallel
Mathematical Mode	Absolute/Percentage
Calibration	Open Circuit/ Short Circuit

Specifications


Power Supply	Voltage 90Vac ~ 125Vac or 190Vac ~ 250Vac
	Frequency 48Hz ~ 62Hz
Display	320*240 dot-matrix display
Interface	RS-232, Handler (option), USB (option)
Flash Memory	64 sets
Operation	Auto、Manual、Remote Trigger
Environment	Temperature : 10℃ ~ 40℃ Humidity : 10% ~ 90%
Dimension (WHD)	365x145x396 mm
Weight	9 Kg

Parameters Measurement Ranges


Parameter	Range	Basic Accuracy (AC parameter : 1KHz)	speed
L, LK	0.1nH ~ 9999.99H	0.1%	75ms
C	0.00001pF ~ 999.99mF	0.1%	75ms
Q,D	0.00001 ~ 99999	0.0005	75ms
Z,X,R	0.00001Ω ~ 99.9999MΩ	0.1%	75ms
Y	0.01nS ~ 99.9999S	0.1%	75ms
θ	-180°~ +180°	0.03°	75ms
DCR	0.01mΩ ~ 99.999MΩ	0.1%	25ms
Turn	0.01 ~ 99999.99turns	0.5%	75ms
Pin-Short	12 pairs, between pin to pin	--	25ms