The 6375 LCR Meter that is provided with high accuracy and speed. It is a cost and multiple- function utility and is able to perform the component test entirely. 6375 can collocate with DC Bias. The friendly operation interface design is in synchronization with the international trend and easy to operate to import into the production lines quickly. Synchronous tests with multiple parameter settings. Because of the high-precision values of measured data and superior efficacy, it must be a necessary testing instrument of components and materials. It supports the interfaces of RS232、Handler、GPIB PC connections.
- Basic accuracy up to 0.1%
- Synchronous tests with multiple parameter settings
- Measurement of wide range of functions: Freq. to 5 Digits, signal level of 10mV to 2Vrms
- Collocating DC Bias to progressing current scanning analysis
- Fixture design capabilities, Specific customized services for clients
- LCR Meters are all compatible with convenient and efficient Meter Link Software
Measurement Data
Test Frequency | 20Hz-200KHz |
Points Of Test Frequency | Continuity |
Basic Accuracy |
± 0.1% |
AC Drive Level |
10mV to 2Vrms (1m Vrms steps) |
DC Drive Level |
0.01V~2V |
Output Impedance | 100Ω |
Frequency trimming resolution |
5 Digits |
Frequency output accuracy |
± 0.01% |
AC test speed (Max.) |
75mS |
DC test speed (Max.) | 30mS |
DC Bias Current Source |
Option (Model 6220) |
Specifications
Measured Value Detection Mode |
Define upper and lower thresholds according to main and sub parameters |
ESR | Series/Parallel |
Mathematical Mode | Absolute/Percentage |
Test Range | Automatic/Lock |
Indicator | Pass/Fail/Bias LED and Built-in speaker |
Output Terminal |
BNC connector |
Safety | EN61010-1 |
Immunity | EN61326-1 |
Emissions | EN55022 Class A |
Calibration |
Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures |
Auto-save when power-off function |
When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again |
Power Supply |
Voltage 90-132Vac or 198-264Vac (selectable) |
Frequency 47 ~ 63Hz |
|
Display |
320*240 dot-matrix display |
Interface | RS-232, GPIB (option), Handler (option) |
Flash Memory |
Built-in flash for storage of 64 groups of Multi-steps setting (Each group contains up to 30 steps) |
Operation | Auto、Manual、RS-232、GPIB (option)、Handler (option) |
Environment | Temperature : 10°C to 40°C Humidity : 20 ~ 90% |
Dimension (W*H*D) | 337x145x522 mm |
Weight | 6.5 Kg |
Parameters Measurement Ranges
|Z| R X | 0.1 mΩ - 100MΩ |
|Y| G B | 10nS - 1000S |
Cs Cp | 0.01pF - >1F |
Ls Lp | 0.01nH - 100KH |
D | 0.00001 - 9.9999 |
Q | 0.1 - 9999.9 |
DCR | 0.1mΩ - 100MΩ |
Δ% | -999.99% - 999.99% |
Θ | -180° - +180° |
Applications
Resistance, Capacitance, Inductance, Oscillators, Sensors, Delay Line, Filters, Resonators
Standard Accessories
- Power Cord
- User Manual
- BNC Kelvin Clips (F423901)
- BNC Kelvin Clips (F423501)
Optional Accessories
- Meter Link Software
- RS-232cable
- Handler Box
- SMD Fixture Box (F423905)
- DIP Fixture Box (F423503)
