Home
Home- Product
- Component Tester
- Benchtop LCR Meter
The 6374 LCR Meter that is provided with high accuracy and speed. It is a cost and multiple- function utility and is able to perform the component test entirely. The only device of simultaneous electrical characteristic measurement of coil and scanning pattern analysis of temperature voice in the world. The main perch of the design is light weight and convenience of carrying. It is convenient for planning the size of the factory and the design of the traffic flow.Because of the high-precision values of measured data and superior efficacy, it must be a necessary testing instrument of components and materials. It supports the interfaces of RS232、Handler、GPIB PC connections.
- Basic accuracy up to 0.1%
- Synchronous tests with multiple parameter settings
- Measurement of wide range of functions: Freq. to 5 Digits, signal level of 10mV to 2Vrms
- LCR Meter are all compatible with convenient and efficient Meter Link Software
Measurement Data
| Test Frequency | 20Hz-100KHz |
| Points Of Test Frequency | Continuity |
| Basic Accuracy |
± 0.1% |
|
AC Drive Level |
10mV to 2Vrms (1m Vrms steps) |
|
DC Drive Level |
0.01V~2V |
| Output Impedance | 100Ω |
|
Frequency trimming resolution |
5 Digits |
|
Frequency output accuracy |
± 0.01% |
|
AC test speed (Max.) |
75mS |
| DC test speed (Max.) | 30mS |
Specifications
| ESR | Series/Parallel |
| Mathematical Mode | Absolute/Percentage |
| Test Range | Automatic/Lock |
| Indicator | Pass/Fail/Bias LED and Built-in speaker |
|
Output Terminal |
BNC connector |
| Safety | EN61010-1 |
| Immunity | EN61326-1 |
| Emissions | EN55022 Class A |
|
Calibration |
Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures |
|
Auto-save when power-off function |
When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again |
|
Power Supply |
Voltage 90-132Vac or 198-264Vac (selectable) |
|
Frequency 47-63Hz |
|
| Display |
320*240 dot-matrix display |
| Interface | RS-232, GPIB (option), Handler (option) |
| Flash Memory |
Built-in flash for storage of 64 groups of Multi-steps setting (Each group contains up to 30 steps) |
| Operation | Auto、Manual、RS-232、GPIB (option)、Handler (option) |
| Environment | Temperature : 10°C to 40°C Humidity : 20 ~ 90% |
| Dimension (W*H*D) | 335x100x322 mm |
| Weight | 5 Kg |
Parameters Measurement Ranges
| ｜Z｜ R X | 0.1 mΩ - 100MΩ |
| ｜Y｜ G B | 10nS - 1000S |
| Cs Cp | 0.01pF - >1F |
| Ls Lp | 0.01nH - 100KH |
| D | 0.00001 - 9.9999 |
| Q | 0.1 - 9999.9 |
| DCR | 0.1mΩ - 100MΩ |
| Δ% | -999.99% - 999.99% |
| Θ | -180° - +180° |
Applications
Resistance, Capacitance, Inductance, Oscillators, Sensors, Delay Line, Filters, Resonators
Standard Accessories
- Power Cord
- User Manual
- BNC Kelvin Clips (F423501)
Optional Accessories
- Meter Link Software
- RS-232cable
- Handler Box
- F423502
- F423504
- F423905
- F420001
TOP