For USB Type-C cable/connector testing, the dedicated option MICROTEST 8761NAC is available. It utilizes a four-wire measurement technology and supports automatic detection of USB Type-C loop orientation for connectors. It offers a maximum AC withstand voltage of 700V and a maximum DC withstand voltage of 1000V. It is equipped with the FX-000C28 2-in-1 current source expansion box, which provides the capability to perform continuity impedance, open/short circuit, safety withstand voltage insulation, RA resistance, and filtering capacitor tests on USB Type-C cables/connectors.
By selecting the FX-000C28 2-in-1 current source expansion box, it is possible to conduct 5A voltage drop internal resistance testing and VDO code reading for E-Marker IC on USB Type-C cables.
SPEC
| Model | 8761NAC | ||
| AC Hi pot Test | 100V-700V | ||
| DC Hi pot Test | 50V-1000V | ||
| Test Pin | 64/128 | ||
| Model | 8761NAC | |
| Safety Hi pot Test | ||
| AC Hipot Leakage Current | 0.01mA -5mA | |
| AC Arcing Detection | 0-9 | |
| DC Hipot Leakage Current | 0.1µA-1000µA | |
| DC Arcing Detection | 0-9 | |
| DC Hipot Insulation Resistance | 1MΩ-1.2GΩ | |
| Hipot Output Accuracy | ±5% | |
| Hipot Measurement Accuracy | ±5% | |
| Rated Output | 5Vdc | |
| Hipot Measurement Time | 0.01秒 - 60秒 | |
| Wire Specifications | Maximum allowable capacitance 5μF | |
| Low Voltage Electrical Test | ||
| Measuring Mode | 4-Wire Test | |
| Conductance | 1mΩ-52Ω | |
| Intermittence Conductance | 1mΩ-52Ω | |
|
O/S Intermittence O/S Quick Intermittence open circuit |
1kΩ-100kΩ | |
| O/S Determinal Judge | ● | |
| Single-Side Test | ● | |
| OS Positive and Negative Judgment Method | Learning netlist by four groups | |
| OS Voltage | Adjustment range 0.1V-4V | |
| OS Netlist Test Mode | Pattern/point-by-point scanning | |
| Component test | ||
| Resistance | Measurement Range | 50mΩ-20MΩ |
| Level Signal | 0.5-3V | |
| Current Signal | 10mA | |
| Capacitance | Measurement Range | 10pF-12µF |
| Level Signal | 0.3V-1.2V | |
| Frequency Signal |
AUTO Gear (Optional) 48Hz/480Hz/4.8kHz/48kHz |
|
| Diode | Measurement Range | 0-6.8V |
| Other Function | ||
| Advanced Functions | Programmable continuous test / Pin search/Auto-diagnosis | |
| Test Scan Mode | Auto, Manual, External Trigger | |
| Measurement Signal | Low Voltage Measurement Signal | |
| Panel | System/Rapid /Edit / Function | |
| Indicator | Pass/Fail HV LED red-green indicator lights / Screen Display /Sound | |
SYSTEM
| Operation | Manual, Auto, Remote Control | ||
| Built-in Storage | Number of test file up to 500 sets | ||
| Power Supply | Fixed Voltage | 115/230 Vac ±10% | |
| Frequency | 60/50Hz | ||
| Power consumption | 300VA | ||
| Environment | Temperature | 0℃-40℃ | |
| Humidity | RH≦75% | ||
| Display | 320*240 dot-matrix display | ||
|
Dimension (W*H*D) |
64PIN | 435x145x406 mm | |
| 128PIN | 435x145x406 mm | ||
| Weight | 64PIN | 8.44Kg | |
| 128PIN | 9.3Kg | ||
| Interface | RS-232, USB Host, Print, Remote | ||
Universal Serial Bus a.k.a. USB
is the interface connect computer and outer device
USB Type-C can be insert by both side, and better power supply. Replace the VGA/DVI/HDMI video transmitting.
USB Type-C give the consumer better experience for transmitting data, media sharing charging mobile device by using on USB cable. Compatible with DisplayPort, MHL and Thunderbolt 3, etc. USB-C will replace more transmitting interface in the future.
Due to the various charging mode that may caused the unfit specification damage the cable and user, USB Type-C needs to insert an E-Mark IC to control the operation. The inspection for protection chip around E-Mark IC is important.
E-Mark IC is the critical part of Type-C interface. Manufacturer takes the quality of protection component around E-Mark IC really seriously.
Microtest Cable Tester 8740NAC is a multifunctional portable tester. Not only detect the poor processing product, but also the O/S status between each contact and the protection component around E-Mark IC.
A desktop portable instrument included conduction, Hi-Pot, component, multi-functional tester fulfill USB Type-C harness inspection.
2-in-1 Current Expand Box FX-000C28 (5A) can measure voltage difference and inner resistance.
And test the USB Type-C E-Marker IC's code.
2-in-1 Current Expand Box FX-000C28 (5A)
can measure voltage difference and inner resistance.
Qualcomm has combine QC 4.0 and latest PD spec.. High Current low voltage is the trend in the future.
Voltage difference and Resistance is the important figures for the quality.
8761NAC All-In-One Test Function For USB Type-C
Standard Accessories
| Power Cord | |
| Fixture Flat Cable (AK-8600F2) |  |
| Adapter board (FX-000C16) |  |
| USB Type-A Fixture (FX-000C21) |  |
| USB Type-C Fixture (FX-000C22) |  |
| Test probe | |
Optional Accessories
| PC Link Software | |
| Remote Cable | |
| Calibration Kits (KB-8740K1) |  |
| Multiple DUT Testing Expand Box (874001) |  |
| Adapter board (FX-000C15) |  |
| Adapter board (FX-000C17) |  |
| Intermi ence O/S Fixture (FX-000C18) |  |
| Networking Fixture |
 |
| Foot Switch (7600010) | |
