14F-6, No. 79, Sec. 1, Xintai 5th Rd, Xizhi Dist., New Taipei City, 22101 Taiwan (R.O.C.)
Tel: 886-2-2698-3877
Fax: 886-2-2698-4089
email : [email protected]
Selection
| 6630 Series | |||||||
| Model | 6630-1 | 6630-3 | 6630-5 | 6630-10 | 6630-20 | 6630-30 | 6630-50 |
| Frequency |
10Hz- 1MHz |
10Hz- 3MHz |
10Hz- 5MHz |
10Hz- 10MHz |
10Hz- 20MHz |
10Hz- 30MHz |
10Hz- 50MHz |
SPEC
| Model | 6630 | |
| Frequency Range | 10Hz-50MHz | |
| Frequency Setting | Continuity | |
| Frequency Resolution | ±0.01% | |
| Frequency Output Accuracy | 100mHz, 6-bit Frequency Input | |
| Basic Accuracy | typical ±0.05% | |
| AC Drive Level | Test Signal Voltage Level |
10mV - 2Vrms(100Ω) 10mV - 1Vrms(25Ω) |
| Voltage Minimum Resolution | 1mV | |
| Accuracy |
ALC ON：6％ * Voltage ±2mV ALC OFF：10％ * Voltage ±2mV |
|
| Test Signal Current Level | 200µA - 20mArms | |
| Current Minimum Resolution | 10µA | |
| Accuracy |
ALC ON：6％ * Current ± 20µA ALC OFF：10％ * Current ± 20µA |
|
| DC Drive Level | 1V (fixed) | |
| Output Impedance | 25Ω/100Ω (switchable) | |
| Measurement Mode | Meter mode, list mode | |
| Measurement Parameters |
|Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、ε and μr |
|
| Test Time (Fastest) | < 3mS | |
Measurement Parameters
| Parameters | Range |
| |Z| | 0.000 mΩ to 9999.99 MΩ |
| R, X | ± 0.000 mΩ to 9999.99 MΩ |
| |Y| | 0.00000 μS to 999.999 kS |
| G, B | ± 0.00000 μS to 999.999 kS |
| θRAD | ± 0.00000 to 3.14159 |
| θDEG | ± 0.000° to 180.000° |
| Cs, Cp | ± 0.00000 pF to 9999.99 F |
| Ls, Lp | ± 0.00 nH to 9999.99 kH |
| D | 0.00000 to 9999.99 |
| Q | 0.00 to 9999.99 |
| Δ | ± 0.00% to 9999.99% |
| Rdc | 0.00 mΩ to 99.9999 MΩ |
| εr' εr'' | 0 to 100000 |
| μr' μr'' | 0 to 100000 |
System
| Measurement Circuit | Series/Parallel |
| Correction | Open Circuit/Short Circuit/Load correction |
| Cable Compensation | 0 / 0.5 / 1 /2 (m) |
| BIN | ABS、ΔABS、Δ%、OFF |
| Comparator | 9 |
| List Mode | 50 groups of Multi-steps setting (Each group contains up to 15 steps) |
| Bulit-in Storge | 100 sets LCR setting documents, 50 groups of list mode setting |
| USB Host Storge | LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data |
| Trigger Test | Auto, manual, RS-232, GPIB, Handler |
| Power Supply | Voltage：90-264Vac |
| Frequency：47-63Hz | |
| Power consumption | 30VA |
| Environment | Temperature：10℃-40℃ |
| Humidity：20-90%RH | |
| Dimension | 336x147x340 mm (W*H*D) |
| Weight | 3 Kg |
| Interface | RS-232、Handler、LAN、USB Host、USB Device |
| Display | Color Screen, 7" TFT (800*480) |
Automatic Production Line
Connect 6630 RS-232, LAN, GPIB or Handler to automatic machine (measuring speed<3mS)，automated production is the most efficiency.
The precision impedance analyzer 6632 has seven frequency options(10Hz to 1/3/5/10/20/30/50MHz).
List Mode
50 groups of list mode setting (Each group contains up to 15 steps).
Four Parameters Displayed Simultaneously
7.0”TFT, 800x480 color screen, and four parameters can displayed simultaneously.
Measure Inductor (DCR)
Inductor coil turns and winding materials will affect DCR value. The key parameters for inductor are Ls / Lp / Q / SRF / DCR.
Magnetic Material Test Fixture (FX-0000C8)
Using the magnetic material test fixture for measuring of permeability of various toroidal cores or ferrite cores and electromagnetic shielding coating materials, 6630 built-in formula to directly calculate the permeability coefficient value μr
Using the dielectric material test fixture for measuring PCB board or ceramic board.
6630 built-in formula to directly calculate the material dielectric value εr '/εr "
Using the liquid dielectric material test fixture for measuring the characteristics of electrochemical materials.
Standard Accessories
| Power Cord | |
| DIP Test Fixture (FX-000C19) |  |
Optional Accessories
| PC Link Software | |
| DIP Test Fixture (F423503) |  |
| DIP Test Fixture (F423504) |  |
| SMD Test Fixture (F423905) |  |
| Kelvin Clip Leads (F423906A) |  |
| Bottom Electrode SMD Test Fixture (FX-000C10) |  |
| SMD Tweezer Test Leads (FX-000C11) |  |
| SMD Test Fixture (FX-000C12) |  |
| Dielectric Material Test Fixture (FX-0000C7) |
 |
| Liquid Dielectric Material Test Fixture (FX-000C20) |  |
| Magnetic Material Test Fixture (FX-0000C8) |
 |
|
Material Testing Fixture (FX-0000C9) |
 |
| External Voltage Bias (F420001) |  |
| External Voltage Bias (F420003) |  |
| External Voltage Bias (F420006) |  |
|
BNC Test Leads (F663001 A/B/C) |
 |
